CLEVELAND EASTERN MIXERS RG-4 CLAMP PORTABLE 3/4 HP 14" Blade paddle @ 400 RPM

Description

This is for (one of for identical)
NEW
CLEVELAND EASTERN MIXERS RG-4 CLAMP PORTABLE mixers with 3/4HP Baldor motor 208-460 vac at 1750 rpm the mixer blade moves at 400 RPM.
Each mixer will come with a mixer blade that scribes a 14" arc with curved blades and side deflector angled paddles on the bottom of each blade.
This system is designed so that all you need to do is cut some 1" rod stock at the length desired for your tank installation and screw the mixer motor and blade on and tour off and running.
The clamp system will allow you to clamp to a wide range of tanks up to 4" thick.  The angle adjustment on the clamping assembly allows the mixer to go from vertical to a 90 degree angle. That is a bit excessive, but it is a really nice clamping system maybe the best I have seen in the industry.  The clamp that secures it to the tank has a nice handle built in.
All four of these are NEW and of identical design. They are from a company that went bankrupt during the process of building their plant and never got around to installing these mixers.
They sell new without the paddle for 00 each and I would guess the mixer blade would run an extra 500 so the new value is around 00 each so you can save a lot of money here on a really nice new mixer.
Thanks for considering us to supply equipment for your project.  I am also listing another small new Cleveland eastern mixer so if this is too large please look at my other auctions.
Mark